fbpx

992K Wheel Loader

Overview

Caterpillar first introduced the 992 in 1968. This large wheel loader has been a global leader ever since, building a reputation as a face loader that's both safe to operate, productive and durable. With the introduction of the K Series, we've enhanced the operator's experience and the safety of those working on and around the machine. With both standard and high lift configurations, this machine will pass match with fleets of 775, 777, and 785 trucks. If your operations revolve around the 992 as a loading tool, you'll find everything that's important to your business in the 992K; safety, productivity, cost control and comfort for your people.

992K Wheel Loader - Specifications

Engine
Net Power
814 HP
607 kW
Engine Model
Cat® C32 ACERT™
Bore
5.7 in
145 mm
Stroke
6.4 in
162 mm
Displacement
1963.5 in³
32.1 l
Torque Rise
30%
Note (Tier 4 Final) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 2 Equivalent) (1)
These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Note (Tier 4 Final) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Emissions (Tier 2 Equivalent): Net Power - SAE J1995
814 HP
607 kW
Emissions (Tier 2 Equivalent): Rated Speed
1750 r/min
1750 r/min
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396
884 HP
659 kW
Note (Tier 2 Equivalent) (2)
Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995
3537 lb/ft
4796 N·m
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995
900 HP
671 kW
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995
3514 lb/ft
4765 N·m
Emissions (Tier 2 Equivalent): Net Power - SAE J1349
814 HP
607 kW
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349
814 HP
607 kW
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995
814 HP
607 kW
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995
907 HP
676 kW
Emissions (U.S. EPA Tier 4 Final): Rated Speed
1750 r/min
1750 r/min
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396
884 HP
659 kW
Operating Specifications
Operating Weight
220089 lb
99831 kg
Bucket Capacity Range
10.7-12.3 m3 (14-16 yd3)
Operating Weight - High Lift
221847 lb
100628 kg
Operating Weight - Standard
220089 lb
99831 kg
Rated Payload - Standard (Face Material)
24 t
21.7 t
Rated Payload - High Lift (Face Material)
21 t
19.1 t
Buckets
Bucket Capacities
10.7-12.3 m3 (14-16 yd3)
Transmission
Transmission Type
Cat Planetary Power Shift
Forward - 1
4.3 mile/h
6.9 km/h
Forward - 2
7.4 mile/h
11.9 km/h
Forward - 3
12.6 mile/h
20.3 km/h
Reverse - 1
4.7 mile/h
7.6 km/h
Reverse - 2
8.1 mile/h
13.1 km/h
Reverse - 3
13.8 mile/h
22.2 km/h
Direct Drive - Forward 3
14.2 mile/h
22.8 km/h
Direct Drive - Forward 1
Disabled
Direct Drive - Forward 2
8 mile/h
12.9 km/h
Direct Drive - Reverse 3
15.4 mile/h
24.8 km/h
Direct Drive - Reverse 1
4.9 mile/h
7.9 km/h
Direct Drive - Reverse 2
8.8 mile/h
14.2 km/h
Axles
Front
Fixed
Rear
Oscillating
Oscillation Angle
10° ±, 8° ± with Stops
Hydraulic Cycle Times
Total Hydraulic Cycle Time
19.3 s
19.3 s
Dump
1.8 s
1.8 s
Rack Back
4.4 s
4.4 s
Raise
9.4 s
9.4 s
Lower Float Down
3.7 s
3.7 s
Service Refill Capacities
Fuel Tank
413 gal (US)
1562 l
Transmission
45 gal (US)
169 l
Differential - Final Drives - Front
95 gal (US)
360 l
Engine Crankcase
32 gal (US)
120 l
Differential - Final Drives - Rear
91 gal (US)
345 l
Hydraulic System - Steering
42 gal (US)
159 l
Hydraulic System - Implement
86 gal (US)
326 l
AC Refrigerant
6 lb
2.72 kg
Cooling Systems
77 gal (US)
290 l
AC Oil
0.071 gal (US)
0.268 l
Dimensions - High Lift - Approximate
Rack Back Angle - Ground Level
42.8 degrees
Tread Width
10.83 ft
3302 mm
Ground to Top of ROPS
18.63 ft
5678 mm
Dump Angle at Maximum Lift
50 degrees
Ground to Bumper Clearance
3.86 ft
1176 mm
Maximum Overall Length
52.81 ft
16095 mm
Rack Back Angle - Carry
52.5 degrees
Ground to Center of Axles
4.44 ft
1352 mm
Clearance at 45° Dump (Tooth Tip)
15.01 ft
4574 mm
Rack Back Angle - Maximum Lift
65 degrees
B-Pin Height - Maximum Lift
24.58 ft
7544 mm
Ground to Top of Hood
13.26 ft
4043 mm
Reach - Maximum Lift
6.86 ft
2092 mm
Ground to Lower Hitch Clearance
2.24 ft
682 mm
Ground to Top of Exhaust Stacks
17.22 ft
5248 mm
Maximum Overall Height - Bucket Raised
33.08 ft
10109 mm
Rear Axle - Centerline to Bumper
13.76 ft
4195 mm
Wheel Base
19.32 ft
5890 mm
Hydraulic System - Steering
Steering Cycle Times - High Idle
4.4 s
4.4 s
Steering Cycle Times - Low Idle
6.4 s
6.4 s
Total Steering Angle
86°
Steering Cut Off Pressure
4500 psi
31000 kPa
Maximum Flow at 1,350 rpm
95 gal/min
360 l/min
Steering System - Pump
Piston, Variable Displacement
Steering System - Circuit
Pilot, Load Sensing
Hydraulic System - Lift/Tilt
Tilt Cylinder - Stroke
80.9 in
2055 mm
Lift Cylinder - Stroke
45.2 in
1148 mm
Relief Valve Setting - Lift/Tilt
4500 psi
31000 kPa
Maximum Flow at 1,850 rpm
254 gal/min
960 l/min
Lift/Tilt System - Pump
Variable Displacement Piston
Tilt Cylinder - Bore
10.5 in
266.7 mm
Lift/Tilt System - Circuit
Positive Flow Control
Lift Cylinder - Bore
11 in
279.4 mm
Dimensions - Standard Lift - Approximate
Ground to Top of Hood
13.26 ft
4043 mm
Ground to Lower Hitch Clearance
2.24 ft
682 mm
Reach - Maximum Lift
6.95 ft
2118 mm
Ground to Center of Axles
4.44 ft
1352 mm
Rack Back Angle - Carry
52.7 degrees
Rear Axle - Centerline to Bumper
13.76 ft
4195 mm
Rack Back Angle - Ground Level
43.4 degrees
Maximum Overall Height - Bucket Raised
30.5 ft
9313 mm
Rack Back Angle - Maximum Lift
65 degrees
Wheel Base
19.32 ft
5890 mm
Clearance at 50° Dump (Tooth Tip)
14.7 ft
4480 mm
B-Pin Height - Maximum Lift
22.73 ft
6927 mm
Maximum Overall Length
52 ft
15736 mm
Tread Width
10.83 ft
3302 mm
Ground to Bumper Clearance
3.86 ft
1176 mm
Dump Angle at Maximum Lift
50 degrees
Ground to Top of Exhaust Stacks
17.22 ft
5248 mm
Ground to Top of ROPS
18.63 ft
5678 mm
Sound Performance
Machine Sound Power Level - Standard Machine Configuration
The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Operator Sound Pressure Level
The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration
The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Brakes
Brakes
Meet ISO 3450:2011