fbpx

910K Compact Wheel Loader - Specifications

Engine
Maximum Gross Power
74 HP
8 kW
Net Power
97 HP
72 kW
Stroke
5 in
127 mm
Maximum Gross Power - ISO 14396
100 HP
74 kW
Maximum Gross Power - ISO 14396 (DIN)
101 HP
74 kW
Maximum Gross Power - Maximum Engine Speed
2350 r/min
2350 r/min
Maximum Gross Power - SAE J1995
102 HP
76 kW
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Rated Net Power - SAE J1349
96 HP
72 kW
Bore
4.13 in
105 mm
Displacement
268 in³
4.4 l
Emissions
Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Maximum Gross Torque - ISO 14396
332 lb/ft
450 N·m
Maximum Gross Torque - SAE J1995
336 lb/ft
455 N·m
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249
97 HP
72 kW
Rated Net Power - ISO 9249 (DIN)
98 HP
72 kW
Engine Model
Cat C4.4
Weights
Operating Weight
16517 lb
7492 kg
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Operating Specifications
Rated Bucket Capacity
2.5 yd³
1.9 m³
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
40.7 gal (US)
154 l
Hydraulic Tank
14.5 gal (US)
55 l
Axles - Front Center Differential
2 gal (US)
7.5 l
Axles - Rear Center Differential
2 gal (US)
7.5 l
Transmission
0.9 gal (US)
3.4 l
Engine Crankcase
2.3 gal (US)
8.8 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Tires
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Standard Size
15.5-25 12PR
Other Choices Include
15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Loader Hydraulic System
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Maximum Flow - Implement Pump
32 gal/min
122 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow
24 gal/min
90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Maximum Working Pressure - Implement Pump
3408 psi
23500 kPa
Relief Pressure - Tilt Cylinder
4931 psi
34000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
21000 kPa
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Steering
Maximum Flow - Steering Pump
17 gal/min
66 l/min
Maximum Working Pressure - Steering Pump
2683 psi
18500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
Steering Articulation Angle - Each Direction
40 °
40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3.2 s
3.2 s
Transmission
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h
20 km/h
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
10 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Axles
Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - ISO 9249
329 lb/ft
446 N·m
Maximum Net Torque - SAE J1349
325 lb/ft
441 N·m