fbpx

914K Compact Wheel Loader

Overview

The Cat® 914K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

914K Compact Wheel Loader - Specifications

Engine
Maximum Gross Power
100 HP
74 kW
Net Power
97 HP
72 kW
Maximum Gross Torque - ISO 14396
332 lb/ft
450 N·m
Bore
4.13 in
105 mm
Displacement
268 in³
4.4 l
Maximum Gross Power - ISO 14396
100 HP
74 kW
Rated Net Power - SAE J1349
96 HP
72 kW
Maximum Gross Power - SAE J1995
102 HP
76 kW
Engine Model
Cat C4.4
Maximum Gross Power - ISO 14396 (DIN)
101 HP
74 kW
Maximum Gross Power - Maximum Engine Speed
2350 r/min
2350 r/min
Stroke
5 in
127 mm
Rated Net Power - ISO 9249 (DIN)
98 HP
72 kW
Rated Net Power - ISO 9249
97 HP
72 kW
Maximum Gross Torque - SAE J1995
336 lb/ft
455 N·m
Rated Net Power - Rated Engine Speed
2200 r/min
2200 r/min
Emissions
Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Weights
Operating Weight
18713 lb
8488 kg
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Operating Specifications
Rated Bucket Capacity
2.5 yd³
1.9 m³
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Service Refill Capacities
Cooling System
5.7 gal (US)
21.5 l
Fuel Tank
40.7 gal (US)
154 l
Transmission
0.9 gal (US)
3.4 l
Hydraulic Tank
14.5 gal (US)
55 l
Engine Crankcase
2.3 gal (US)
8.8 l
Hydraulic System - Including Tank
25.9 gal (US)
98 l
Axles - Rear Center Differential
2 gal (US)
7.5 l
Axles - Front Center Differential
2 gal (US)
7.5 l
Steering
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s
2.8 s
Maximum Flow - Steering Pump
22 gal/min
82 l/min
Steering Articulation Angle - Each Direction
40 °
40 °
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns
3.75 turns
Maximum Working Pressure - Steering Pump
3263 psi
22500 kPa
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4931 psi
34000 kPa
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s
3.7 s
Hydraulic Cycle Time - Rackback
2.2 s
2.2 s
Hydraulic Cycle Time - Total Cycle Time
12.5 s
12.5 s
Maximum Working Pressure - Implement Pump
4061 psi
28000 kPa
Maximum Flow - Implement Pump
39 gal/min
148 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi
21000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
90 l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s
5.2 s
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s
1.4 s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
120 l/min
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi
21000 kPa
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
90 l/min
Engine - Tier 4 Final/Stage IV
Maximum Net Torque - SAE J1349
325 lb/ft
441 N·m
Maximum Net Torque - ISO 9249
329 lb/ft
446 N·m
Tires
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Standard Size
17.5-25 12PR
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Axles
Rear
Oscillating �11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)
Transmission
Forward and Reverse - Low Range, Speed Range 2*
12.5 mile/h
20 km/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1*
6.3 mile/h
10 km/h