fbpx

926M Aggregate Handler Small Wheel Loader

Overview

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

926M Aggregate Handler Small Wheel Loader - Specifications

Engine
Maximum Gross Power
153 HP
114 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
531 ft·lbf
721 N·m
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
151 HP
111 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
155 HP
114 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
148 HP
109 kW
Note (1)
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
511 ft·lbf
694 N·m
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
141 HP
105 kW
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
142 HP
106 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
146 HP
109 kW
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
531 ft·lbf
721 N·m
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Engine Model
Cat® C7.1
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
153 HP
114 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
149 HP
111 kW
Rated Net Power
148 HP
110 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
148 HP
110 kW
Maximum Rated Gross Power - ISO 14396 (DIN)
155 HP
114 kW
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
144 HP
106 kW
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
517 ft·lbf
702 N·m
Maximum Rated Gross Power - ISO 14396
153 HP
114 kW
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
511 ft·lbf
694 N·m
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
517 ft·lbf
702 N·m
Weights
Operating Weight
28933 lb
13128 kg
Buckets
Bucket Capacities
2.5 m3 (3.3 yd3)
Cab
ROPS
ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function*
40 gal/min
150 l/min
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061 psi
28000 kPa
Note (3)
* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.5/6.2 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3771 psi
26000 kPa
Lift Cylinder, Double Acting - Bore Diameter
4.3 in
110 mm
Maximum Flow - Implement Pump
40 gal/min
150 l/min
Tilt Cylinder, Double Acting - Stroke
21.9 in
555 mm
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Maximum Working Pressure - Implement Pump
3771 psi
26000 kPa
Lift Cylinder, Double Acting - Rod Diameter
2.4 in
60 mm
Tilt Cylinder, Double Acting - Rod Diameter
2.8 in
70 mm
Tilt Cylinder, Double Acting - Bore Diameter
5.1 in
130 mm
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.6/10.5 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.6/2.6 seconds
Service Refill Capacities
Rear Axles
5.5 gal (US)
21 l
Cooling System
7.9 gal (US)
30 l
Hydraulic System - Including Tank
42.3 gal (US)
160 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Fuel Tank
51.5 gal (US)
195 l
Front Axles
5.5 gal (US)
21 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Engine Crankcase
5.3 gal (US)
20 l
Hydraulic Tank
23.8 gal (US)
90 l
Power Train
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Note (2)
Offset rims available to meet European roading requirements.
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25
± 13.5 degrees
Brakes - Parking
Spring applied hydraulically released
Front Axle - Traction Aid**
Locking differential (standard)
Rear Axle
Oscillating
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Note (3)
**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Rear Axle - Traction Aid - Optional
Limited slip differential
Steering
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
37620 N·m
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
50375 N·m
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 4
25 mile/h
40 km/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 2
8 mile/h
13 km/h
Forward and Reverse - Range 3
17 mile/h
27 km/h
Operating Specifications
Full Turn Tip Load
17580 lb
7976 kg