fbpx

930M Small Wheel Loader

Overview

The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience the new industry benchmark.

930M Small Wheel Loader - Specifications

Engine
Maximum Gross Power
164 HP
122 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Maximum Rated Gross Power - ISO 14396
164 HP
122 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP
119 kW
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
566 ft·lbf
768 N·m
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note (1)
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
154 HP
115 kW
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)
572 ft·lbf
776 N·m
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP
116 kW
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
566 ft·lbf
768 N·m
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf
804 N·m
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
592 ft·lbf
804 N·m
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
160 HP
119 kW
Rated Net Power
157 HP
117 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Engine Model
Cat® C7.1
Maximum Rated Gross Power - ISO 14396 (DIN)
166 HP
122 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
157 HP
117 kW
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
166 HP
122 kW
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
164 HP
122 kW
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
119 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note (4)
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
162 HP
119 kW
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
116 kW
Weights
Operating Weight
31144 lb
14131 kg
Buckets
Bucket Capacities
2.5-2.7 m3 (3.3-3.5 yd3)
Cab
ROPS
ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Note (2)
The Blue Angel environmental label is an optional attachment for Europe only.
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
50375 N·m
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
37620 N·m
Loader Hydraulic System
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Relief Pressure - Tilt Cylinder - 3rd Function Relief Pressure
4061 psi
28000 kPa
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Lift Cylinder, Double Acting - Bore Diameter
4.7 in
120 mm
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min
190 l/min
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Note (3)
* 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Maximum Working Pressure - Implement Pump
3626 psi
25000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3626 psi
25000 kPa
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in
150 mm
Lift Cylinder, Double Acting - Rod Diameter
2.6 in
65 mm
Tilt Cylinder, Double Acting - Stroke
21.9 in
555 mm
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in
90 mm
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Cooling System
7.9 gal (US)
30 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Fuel Tank
51.5 gal (US)
195 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Rear Axles
6.6 gal (US)
25 l
Engine Crankcase
5.3 gal (US)
20 l
Hydraulic Tank
23.8 gal (US)
90 l
Front Axles
6.9 gal (US)
26 l
Power Train
Note (2)
Offset rims available to meet European roading requirements.
Brakes - Service
Inboard wet disc
Front Axle
Fixed
Rear Axle - Traction Aid - Optional
Limited slip differential
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Note (3)
**Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Front Axle - Traction Aid**
Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Brakes - Parking
Spring applied hydraulically released
Rear Axle
Oscillating
Operating Specifications
Full Turn Tip Load
19563 lb
8876 kg
Transmission
Forward and Reverse - Range 4
25 mile/h
40 km/h
Forward and Reverse - Range 3
17 mile/h
27 km/h
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
13 km/h