fbpx

950M Wheel Loader | Front Loader | Tier 3

Overview

The 950M Wheel Loader is equipped with built-in proven technologies to help meet your expectations for productivity and fuel efficiency. This wheel loader offers a standard lock up clutch torque converter, standard manual front locking differential axles, and improved standard ride control to significantly improve your fuel economy, performance and ergonomics. This machine deliversthe reliability, durability, and versatility you’ve come to expect from a Cat machine.

950M Wheel Loader | Front Loader | Tier 3 - Specifications

Engine - Tier 4 Final/Stage IV
Emissions
Tier 3/Stage IIIA
Weights
Operating Weight
42360 lb
19214 kg
Note
Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, manual diff lock/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 (4.1 yd3) general purpose bucket with BOCE.
Buckets
Bucket Capacities
2.5-9.2 m³ (3.3-12.0 yd³)
Transmission
Note
Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius.
Forward - 5
24.5 mile/h
39.5 km/h
Forward - 2
7.5 mile/h
12 km/h
Forward - 1
4.3 mile/h
6.9 km/h
Forward - 4
16 mile/h
25.7 km/h
Reverse - 2
7.5 mile/h
12 km/h
Reverse - 1
4.3 mile/h
6.9 km/h
Reverse - 3
16 mile/h
25.7 km/h
Forward - 3
12 mile/h
19.3 km/h
Dimensions - Standard Lift
Lift Arm Clearance at Maximum Lift
10.75 ft
3280 mm
Wheel Base
11 ft
3350 mm
Ground Clearance
1.17 ft
367 mm
Rack Back at Ground
38 degrees
Rack Back - Maximum Lift
59 degrees
Height - Top of Hood
8.83 ft
2697 mm
Centerline of Rear Axle to Hitch
5.5 ft
1675 mm
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Centerline of Rear Axle to Edge of Counterweight
6.33 ft
1942 mm
Tread Width
7 ft
2140 mm
Rack Back - Carry Height
46 degrees
Hinge Pin Height at Maximum Lift
13.25 ft
4027 mm
Maximum Width - Over Tires - Loaded
9.33 ft
2822 mm
Height - Top of ROPS
11.33 ft
3446 mm
Hinge Pin Height at Carry Height
2.08 ft
647 mm
Height - Top of Exhaust Pipe
11.17 ft
3413 mm
Overall Length - Without Bucket
22.67 ft
6906 mm
Dimensions - High Lift
Note
All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket
24.58 ft
7488 mm
Ground Clearance
1.17 ft
367 mm
Rack Back - Maximum Lift
56 degrees
Tread Width
7 ft
2140 mm
Hinge Pin Height at Carry Height
2.58 ft
782 mm
Height - Top of ROPS
11.33 ft
3446 mm
Rack Back - Carry Height
49 degrees
Maximum Width - Over Tires - Loaded
9.33 ft
2822 mm
Height - Top of Exhaust Pipe
11.17 ft
3413 mm
Hinge Pin Height at Maximum Lift
14.83 ft
4527 mm
Lift Arm Clearance at Maximum Lift
11.92 ft
3634 mm
Wheel Base
11 ft
3350 mm
Centerline of Rear Axle to Edge of Counterweight
6.83 ft
2071 mm
Centerline of Rear Axle to Hitch
5.5 ft
1675 mm
Rack Back at Ground
42 degrees
Height - Top of Hood
8.83 ft
2697 mm
Operating Specifications
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1)
For a machine configuration as defined under ?Weight.?
Static Tipping Load - Full 40° Turn - No Tire Deflection
25926 lb
11760 kg
Static Tipping Load - Full 40° Turn - With Tire Deflection
24262 lb
11005 kg
Breakout Force
40690 lbf
181 kN
Engine
Maximum Net Torque - 1,400 rpm
726 ft-lb
984 N·m
Maximum Power - 2,000 rpm - SAE J1995
263 HP
196 kW
Displacement
428 in³
7.01 l
Maximum Net Power - 2,000 rpm - ISO 9249
248 HP
185 kW
Peak Gross Torque - 1,400 rpm - ISO 14396
774 ft-lb
1050 N·m
Maximum Net Power - 2,000 rpm - ISO 9249 - Metric
252 HP
185 kW
Maximum Power - 2,000 rpm - ISO 14396
261 HP
195 kW
Peak Gross Torque - 1,400 rpm - SAE J1995
777 ft-lb
1053 N·m
Engine Model
Cat C7.1
Maximum Power - 2,000 rpm - ISO 14396 - Metric
265 HP
195 kW
Maximum Net Power - 2,000 rpm - SAE J1349
248 HP
185 kW
Net Power - ISO 9249
248 HP
185 kW
Sound
Note
*Distance of 15 m (49.2 ft), moving forward in second gear ratio.
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)
70 dB(A)
70 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)
107 dB(A)
107 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)
75 dB(A)*
Bucket Capacities
Bucket Range
2.5-9.2 m³ (3.3-12.0 yd³)
Service Refill Capacities
Differential - Final Drives - Rear
11.4 gal (US)
43 l
Differential - Final Drives - Front
11.4 gal (US)
43 l
Crankcase
5.8 gal (US)
22 l
Hydraulic Tank
33 gal (US)
125 l
Cooling System
15.6 gal (US)
59 l
Fuel Tank
72.6 gal (US)
275 l
Transmission
11.4 gal (US)
43 l
Hydraulic System
Implement System - Maximum Operating Pressure
4250 psi
29300 kPa
Implement Pump Type
Variable Axial Piston
Hydraulic Cycle Time - Total
9.1 s
9.1 s
Implement System - Maximum Pump Output at 2,150 rpm
76 gal/min
286 l/min